Pre-Pitch sticks go on your shower sub floor, underneath your liner. This provides a slight slope to the liner towards the drain and any water that goes through the mortar bed is still directed out of the shower.
With this time-saving system there is now no chance for an error in measurement, or the need for a level, to achieve a properly pre-pitched shower floor using a traditional mortar bed application. The Pre-Pitch Standard Kit is used for standard 30" x 60" shower areas with a centered drain, or custom shower areas where the drain is within 36" of each wall. If your shower area exceeds these measurements you will need to order the Pre-Pitch Extended Float Sticks for shower areas where the walls are more than 36" (but less than 72") from the floor drain. Be sure to use the same amount of Quick-Pitch Sticks above your liner.
If you require additional sticks for your area you can buy Pre-Pitch single sticks. It is recommended that the sticks are no more than 30" apart when laid out.
Product Information and Installation