Better Benches Product Information and Installation

Adjustable Rectangular Bench Installation 

InvisaBolt Installation 

Better Bench Corner Seat

What once took days can now be done in about an hour and these products can be installed before or after the finish tile is applied to vertical surfaces. Tested weight capacity on the benches is 400 lbs, on the shelf it is 100 lbs, over and above mortar and finished slab when installed to manufacturer's instructions. 

These self-supporting, one piece frames are easy to install with supplied fasteners, requiring no additional waterproofing or structural reinforcement.

The Adjustable Rectangular Bench  BUY NOW

This adjustable bench can be mounted to most vertical surfaces quickly and efficiently, saving the installer valuable time. The adjustable bench starts at 33 1/2" and can be pulled to a maximum of 60". Though this is a benefit, some showers are too narrow to accommodate the 33 1/2" and need something smaller. 

All you need is a 4" hand grinder, metal cutting blade, and a sharpie to mark your line. 

 

When cutting your adjustable rectangle bench, you will want to make sure that you cut both pieces the same, as well as cutting 2" smaller than measurement is suggested.

Click here to see how to install this bench with the bolt support system.

This bench adjusts from 33 1/2" to 60" x 3" Front Face and has 14 1/2" wall sides. Supplied with hollow wall anchors and wood screws.

If building greater than 36" long or if you have one end without a support wall, you will need one of the two support options. Support bolt requirements on link above OR  BT-17S Support for the center/open end of the Bench. You will require one support for every 36".

30" Triangular Bench  BUY NOW 

This bench has a 30" x 3" Front Face and 21 1/2" wall sides. Supplied with hollow wall anchors and wood screws.

 24" Triangle Bench Seat  BUY NOW

This bench has a 24" x 3" Front Face and 17" wall sides. Supplied with hollow wall anchors and wood screws.

 17" Triangular Shelf   BUY NOW

**Also Rectangle Bench Support**

 It has an engineered 100 lb load capacity. This shelf has a 3" x 17" Front Face and 12" wall sides. Supplied with hollow wall anchors and wood screws.