The Adjustable Rectangular Bench is a fully independent unit which can be mounted to most vertical surfaces quickly and efficiently, saving the installer valuable time. This self-supporting, one piece frame is easy to install with supplied fasteners and requires no additional waterproofing or structural reinforcement. With a tested weight capacity of 400 lbs when installed to manufacturer's instructions and made of long lasting corrosion resistant material, the Adjustable Rectangular Bench can be installed in wet or dry locations before OR after finish tile is applied!
- NEW!! BB-R26-ADJR adjusts from 19" to 32" and offers a 14.5" deep seat and is 3" tall.
- BB-ADJR-60 adjusts from 33.5" to 60" wide and offers a 14.5" deep seat and is 3" tall.
When installing a bench longer than 36" or if you have one end without a support wall, you will need a BT-17 Support or the Inbolt Support for the center or open end of the bench. One support is required for every 36" of bench. Click here for complete adjustable bench support requirements.
TO DETERMINE SUPPORT REQUIREMENT, are you mounting the bench...
- Wall to wall up to 36″: No additional support required
- Wall to wall up to 63″: One (1) BT-17 centered in span OR 2 Support Bolts required
- On back wall and one side wall up to 36″: One (1) BT-17 within 6″ of open end OR two (2) Support Bolts required
- On back wall and one side wall up to 63″: Three (3) Support Bolts required
- With no side support up to 36″: Two (2) Support Bolts required
- With no side support up to 48″: Three (3) Support Bolts required
- With no side support up to 63″ (max span of BB-ADJR): Four (4) Supports Bolt required
Love the look of a "floating" bench in your shower? Use just the Support Bolt system to create that streamline look.
Is your shower narrower than expected despite measuring twice? Click here to see how to cut the BB-ADJR-60 to a shorter length.