This kit is enough to do up to a 53" x 53" shower with a center drain (or with your drain placed within 36" of any wall/corner) and up to 30" of curbed area, floor and 6" up walls. This product can be used on your shower walls (not recommended for use over drywall). The Handi-Kirb does not require Bituthene Curb Seal as the entire Handi-Kirb is filled with mortar and there is no wood substrate.
Included in the kit:
- 1 x Pre-Pitch Kit + 2 singles
- 1 x 30" Handi-Kirb Kit
- 1 x Quick-Pitch Kit + 2 singles
- 1 x Weep Hole Protector
- 1 x 15" x 15" Fiberglass Mesh
- 1 x Fiberglass Mesh Tape
- 1 x RedGard 1 Gallon
- 1 x Oatey 3 part drain assembly
Add on option for extra curb for 60"
Installation and Product Information RedGard
More Information on Handi Curb
Looking for more waterproofing options?
Always read and follow manufacturer installation instructions, In order to ensure that RedGard fully penetrates into a gypsum underlayment, we recommend diluting the first coat with water (4 parts water to 1 part RedGard); it works in more effectively on its first coat diluted. Once the first coat has dried, a second coating of undiluted RedGard is required. Full manufacturer installation and warranty available.
Any time you are building a shower pan you need to do a water test, this is after the pan and curb are in plug the drain, put water mark level and wait 24 hrs to make sure there are no leaks. In the RedGard application this water test would be just before tiling.
