Quick Pitch How It Works

The Quick Pitch Standard Kit has 6 Tapered Float Sticks (1" to 1 3/4" x 36" long) and 4" Center Ring (3 5/8" inside diameter x 1" high) If your shower is larger than 30" x 60" you will require additional single sticks. (Perimeter: 1 stick every 30")

 The Quick-Pitch System permits easy construction of traditional mortar bed shower floors with the proper minimum water drainage slope of 1/4" per 12" run. The Quick-Pitch system is made to go above your liner to make a perfect pitch all the way around your drain and your tile is laid directly on top of this mortar bed.

Ensure to use the same amount of Pre-Pitch Sticks below your liner on your sub floor. 

With this time-saving system there is now no chance for an error in measurement, or the need for a level, to achieve a properly sloped shower floor. The Quick-Pitch Kits is used for standard 30" x 60" shower areas with a centered drain, or custom shower areas where the drain is within 36" of each wall. This system does not add to the pan liner pre-slope as the Center Ring sits on top of the drain flange bolts. 

For shower areas where the walls are more than 36" (but less than 72") from the floor drain you will need to order the Quick Pitch Extended, Package of 4. each stick is (1 3/4" to 2 1/2" x 36" long) the installation instructions are in the included.

Please Note: The extended package does not come with any standard sticks, the extended sticks simply clip into the end of the standard sticks. 

                      Quick-Pitch Kit 

                                          Quick-Pitch Center Ring