Red Gard Roll On Membrane Shower Kit with Kirb-Perfect is enough to do up to a 53" x 53" shower with a center drain (or with your drain placed within 36" of any wall/corner) and up to 30" of curbed area. You can find additional products for the Quick-Pitch System here. This kit is only for the floor and 6" up walls. This product can be used on your shower walls (not recommended for use over drywall).
Included in this kit
- 1 x Pre-Pitch Kit + 2 singles
- 1 x 30" Kirb-Perfect Kit
- 1 x Quick-Pitch Kit + 2 singles
- 1 x Weep Hole Protector
- 1 x 45" Length Bituthene Curb Seal
- 1 x 15" x 15" Fiberglass Mesh
- 1 x 6" x 75' roll Fiberglass Mesh Tape
- 1 x RedGard 1 Gallon
- 1 x Oatey 3 part ABS/PVC drain assembly
Option to add extra Kirb-Perfect and Bituthene for total 60" curb.
Always read and follow manufacturer installation instructions, In order to ensure that RedGard fully penetrates into a gypsum underlayment, we recommend diluting the first coat with water (4 parts water to 1 part RedGard); it works in more effectively on its first coat diluted. Once the first coat has dried, a second coating of undiluted RedGard is required. Full manufacturer installation and warranty available.
Any time you are building a shower pan you need to do a water test, this is after the pan and curb are in plug the drain, put water mark level and wait 24 hrs to make sure there are no leaks. In the RedGard application this water test would be just before tiling.